How to Deal with the Failure of Fluoro rubber O-rings?
Fluoro rubber O-rings is prone to failure due to improper use in daily work, such as overheating of the rubber ring. The failure of the fluoro rubber O-ring not only delays the daily work and operation but also wastes human and material resources and causes losses. Therefore, we must be familiar with the solutions for different situations. The following methods are summarized for Chuyue rubber products
1. Fluoro rubber O-rings overheated
If the fluorine rubber O-ring overheats, check the sealing chamber and cooling device of the centrifugal pump as soon as possible. This inspection is mainly to check whether there is a blockage in the equipment. If there is a blockage, it should be cleaned up in time.
2. Improper specification selection
Improper selection of fluoro rubber O-ring will lead to permanent deformation and affect the use. It will not only make the fluoro rubber O-ring lose its original performance and fracture, but also prevent the sliding parts from moving. Therefore, the choice must be careful and matching.
3. Extrusion of fluoro rubber O-ring
Sometimes the space of the fluoro rubber O-ring is narrow. When the space is narrow, the extrusion phenomenon will appear. At this time, all parts of the fluoro rubber O-ring should be adjusted immediately to improve the narrow space.